Prakonsentrasi logam tembaga dengan ekstraksi fasa padat menggunakan karbon aktif termodifikasi Fe3O4

Kurniawati, Dewi (2022) Prakonsentrasi logam tembaga dengan ekstraksi fasa padat menggunakan karbon aktif termodifikasi Fe3O4. Sarjana thesis, UIN Sunan Gunung Djati Bandung.

[img]
Preview
Text (COVER)
1_cover.pdf

Download (252kB) | Preview
[img]
Preview
Text (ABSTRAK)
2_Abstrak.pdf

Download (218kB) | Preview
[img]
Preview
Text (DAFTAR ISI)
3_Daftar Isi.pdf

Download (324kB) | Preview
[img]
Preview
Text (BAB I)
4_Bab 1.pdf

Download (252kB) | Preview
[img] Text (BAB II)
5_Bab 2.pdf
Restricted to Registered users only

Download (744kB) | Request a copy
[img] Text (BAB III)
6_Bab 3.pdf
Restricted to Registered users only

Download (605kB) | Request a copy
[img] Text (BAB IV)
7_Bab 4.pdf
Restricted to Registered users only

Download (1MB) | Request a copy
[img] Text (BAB V)
8_Bab 5.pdf
Restricted to Registered users only

Download (199kB) | Request a copy
[img] Text (DAFTAR PUSTAKA)
9_Daftar Pustaka.pdf
Restricted to Registered users only

Download (414kB) | Request a copy

Abstract

Tembaga merupakan salah satu unsur logam berat yang menjadi pencemar di lingkungan perairan. Kadar tembaga dalam perairan cenderung rendah sehingga dalam penentuan kadarnya perlu dilakukan prakonsentrasi. Proses prakonsentrasi pada penelitian ini dilakukan dengan metode ekstraksi fasa padat dengan fasa padat karbon aktif termodifikasi Fe3O4 untuk meningkatkan kemampuan karbon aktif dalam prakonsentrasi logam tembaga. Penelitian ini bertujuan untuk mengidentifikasi karakteristik karbon aktif-Fe3O4 yang disintesis dengan metode kopresipitasi serta kinerja karbon aktif-Fe3O4 dalam proses prakonsentrasi dan validitas dari metode prakonsentrasi yang dilakukan. Proses prakonsentrasi dilakukan dengan menggunakan metode kolom. Kolom yang digunakan pada penelitian ini yaitu syringe 3 mL. Adapun proses prakonsentrasi dilakukan dengan melewatkan larutan sampel ion logam Cu(II) ke dalam kolom berisi fasa padat, kemudian dielusi menggunakan eluen. Dalam proses prakonsentrasi dilakukan optimasi massa fasa padat, jenis, konsentrasi dan volume eluen. Kadar logam tembaga dalam eluat yang dihasilkan dianalisis menggunakan FAAS. Hasil karakterisasi XRD menunjukkan adanya puncak yang lebar pada 35,33° yang mendominasi puncak fasa karbon aktif-Fe3O4. Puncak yang menonjol ini sangat cocok dengan fasa kristal tunggal dari struktur spinel kubik terbalik dari Fe3O4. Hasil karakterisasi SEM menunjukkan bahwa permukaan karbon aktif-Fe3O4 terbentuk bongkahan-bongkahan dengan permukaan yang tidak rata serta tertutup partikel-partikel berwarna putih yang menunjukkan bahwa adanya logam Fe yang berhasil menempel pada permukaan karbon aktif sehingga luas permukaan karbon aktif meningkat. Kinerja karbon aktif-Fe3O4 sebagai fasa padat untuk prakonsentrasi logam tembaga memiliki % ekstraksi yang tinggi pada massa 0,20 gram menggunakan eluen HNO3 1 M sebanyak 4 mL dengan faktor prakonsentrasi sebesar 15. Metode ini memiliki validitas yang baik dengan diperoleh hasil bahwa prakonsentrasi linear pada konsentrasi runut dengan koefisien regresi sebesar 1; nilai LOD dan LOQ masing-masing sebesar 0,05 mg/L dan 0,17 mg/L; % RSD sebesar 2,59% dan % perolehan kembali sebesar 91,53%. Copper is one of the heavy metal elements that become a pollutant in the aquatic environment. The levels of copper in the waters tend to be low, so pre-concentration is necessary to determine the levels. The pre-concentration process in this study was carried out using a solid phase extraction method with a solid phase of modified activated carbon with Fe3O4 to increase the ability of activated carbon to preconcentrate copper metal. This study aims to identify the characteristics of activated carbon-Fe3O4 synthesized by coprecipitation method and performance of activated carbon-Fe3O4 in the preconcentration process and the validity of the preconcentration method carried out. The pre-concentration process was carried out using the column method. The column used in this study is a 3 mL syringe. The pre-concentration process was carried out by passing a sample solution of Cu(II) metal ion into a column containing a solid phase, and then eluted using an eluent. In the pre-concentration process optimization of solid phase mass, type, concentration, and volume of eluent are all analyzed. The levels of copper metal in the eluate were analyzed by FAAS. The XRD characterization results showed a wide peak at 35.33° which dominated the peak of the activated carbon-Fe3O4 phase. These prominent peaks closely match the single-crystal phase of the inverted cubic spinel structure of Fe3O4. The SEM characterization results showed that the surface of the activated carbon-Fe3O4 formed lumps with an uneven surface and covered with white particles which indicated that the presence of Fe metal had successfully attached to the surface of the activated carbon. The performance of activated carbon-Fe3O4 as a solid phase for pre-concentration of copper metal has a high % extraction at a mass of 0.20 grams using 4 mL of 1 M HNO3 eluent with a preconcentration factor of 15. The method has good validity with the results obtained that the linearity at trace concentration with the regression coefficient value is 1; the LOD and LOQ values are 0.05 mg/L and 0.17 mg/L; % RSD value is 2.59%, and % accuracy value is 91.53%.

Item Type: Thesis (Sarjana)
Uncontrolled Keywords: FAAS; karbon aktif-Fe3O4; prakonsentrasi; tembaga
Subjects: Analytical Chemistry
Inorganic Chemistry
Ecology > Environmental Chemistry
Divisions: Fakultas Sains dan Teknologi > Program Studi Kimia
Depositing User: Dewi Kurniawati
Date Deposited: 11 Oct 2022 02:03
Last Modified: 11 Oct 2022 02:03
URI: https://etheses.uinsgd.ac.id/id/eprint/59478

Actions (login required)

View Item View Item